COURS.

Geotechnical Site Investigation and Instrumentation

Webinaire / les 20 et 21 janvier 2022 /
Code : 12-0104-ONL22

Inscrivez-vous
La confirmation du cours dépend de votre inscription. Inscrivez-vous tôt pour éviter que le cours soit reporté ou annulé.
  • APERÇU
  • PROGRAMME
  • FORMATEUR

APERÇU

Veuillez noter :
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):

10:00 am to 6:00 pm Eastern (Will include the usual breaks)

After participating in this course, you will be able to:

  • Understand the principles and procedures for geotechnical site investigation.
  • Learn how to select the right type of instrument for monitoring and site investigation.
  • Become knowledgeable about the observational method in geotechnical engineering and state-of-the-art technologies used for geotechnical investigation.
  • Gain insight into the long term behaviour of geotechnical structures.
  • Review applications of site investigation, geotechnical monitoring and instrumentation for slopes, settlement, fills, excavations and walls.

Description
Geotechnical engineers have a fascinating, yet occasionally confounding, job because they deal with inherently variable materials arranged by Nature - soil and rock. Karl Terzaghi once purportedly stated, “Nature has no contract with mathematics…” Similarly Peck (1972) stated, “In construction underground, where the engineer deals with materials having properties that vary not only in space but also in time, details of construction often have significant or even overwhelming influence on the behavior of the structure and of the surrounding soil.

For an understanding of the behavior, these details must be observed and recorded.” As such, geotechnical engineers, perhaps more than any other branch of civil engineering, rely on physical (and preferably insitu) measurements of material (soil and rock) properties and behavior for use in engineering design and in the subsequent evaluation of engineering performance.

Course Outline:

  • Introduction to site investigation
  • Site investigation methods
  • Application of instrumentation in geotechnical engineering
  • Intro to Emerging Technologies
  • Case histories of site investigation and instrumentation

Who Should Attend:
Designers • Planners • Construction Managers • Geotechnical Engineers • Municipal Engineers • Contractors • Owners and Other Technical Personnel Interested Geotechnical Site Investigation and Monitoring of Soil Structure



Veuillez noter :
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):

10:00 am to 6:00 pm Eastern (Will include the usual breaks)

Horaire : 10:00 AM - 6:00 PM EDT

Exigences techniques

Pour les utilisateurs de PC
OS: Windows 7, 8, 10 ou plus récent

Navigateur :
IE 11 ou plus récent, Edge 12 ou plus récent, Firefox 27 ou plus récent, Chrome 30 ou plus récent

Pour les utilisateurs de Macintosh
OS: MacOS 10.7 ou plus récent

Navigateur :
Safari 7+, Firefox 27+, Chrome 30+

iOS
OS: iOS 8 ou plus récent

Android
OS: Android 4.0 ou supérieur

voir le programme complet

PROGRAMME

Veuillez noter :
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):

10:00 am to 6:00 pm Eastern (Will include the usual breaks)

Day I

  • Introduction to Geotechnical Monitoring and Observational Method
  • Drilling for Site Investigation and Sampling Methods
  • Geophysical Methods for Site Investigation
  • Field Hydraulic Conductivity Measurement

Geotechnical Site Investigation Methods

  • Standard Penetration Test and Interpretation
  • Cone Penetration Test and Interpretation
  • Pressuremeter Test
  • Dilatometer and Goodman Jack

Day II

  • Borehole shear test
  • Plate load test
  • Borehole shear test
  • Emerging technologies
  • Field Vane Shear test

Geotechnical Instrumentation and Monitoring

  • Introduction to geotechnical instrumentation
  • Introduction to instrumentation transducers
  • Measurement of deformation in soil
  • Measurement of stress change in rock
  • Measurement of total stress in soil
  • Measurement of strain
  • Measurement of load
  • Calibration and maintenance of instruments
  • Emerging site investigation and instrumentation tools

Application of Geotechnical Instrumentation

  • Monitoring of drilled shafts
  • Monitoring of embankment dams
  • Monitoring of driven piles
  • Monitoring of underground excavations
  • Monitoring of slopes
  • Monitoring of embankments on soft ground
  • Monitoring of braced excavations

FORMATEUR

Abouzar Sadrekarimi, Ph.D., P.Eng.

Abouzar Sadrekarimi, Ph.D., P. Eng.

Dr. Sadrekarimi is an Associate Professor of Civil Engineering at Western University (London, Ontario). Dr. Sadrekarimi’s academic and professional expertise involve soil mechanics, foundation engineering, deep foundations, dam, advanced soil testing and characterization of soil behavior, in-situ testing, soil dynamics and geotechnical earthquake engineering, static and dynamic analysis of retaining walls, buried structures, and slope stability analysis. He joined Western after several years of engineering practical experience at Golder Associates Ltd. Dr. Sadrekarimi has over 50 published papers in peer-reviewed conference proceedings and journals. Dr. Sadrekarimi is a member of the International Society of Soil Mechanics and Foundation Engineering (ISSMFE), American Society of Civil Engineers (ASCE), Canadian Geotechnical Society, research director of Western’s Geotechnical Research Centre (GRC), and an associate editor of the Canadian Geotechnical Journal.



INSCRIVEZ-VOUS
VOUS N’ÊTES PAS INTERESSÉ PAR CE COURS ?

Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).

Svp cochez cette case :
Note d’évaluation pour cette formation
4.6 sur 5

Évaluation globale de ce cours par ses participants précédents !

UNITÉS & FRAIS
  • 14 Heures de formation continue

1295 $ (+ TPS/TVQ)

Inscrivez-vous




Accumulez vos HEURES DE FORMATION CONTINUE

Tous les cours du CIPE vous permettent d’obtenir vos Heures de formation continue ; utiles pour ceux qui doivent accumuler et soumettre leurs Heures comme l’exige l’Ordre des ingénieurs du Québec.

Ces exigences de formation prennent fin le 31 mars 2023 !

VOIR LES COURS
Abonnez-vous à notre bulletin électronique
Formation en entreprise

Les AVANTAGES de la formation de groupe en ligne :

  • Efficacité et coût
  • Des cours de grandes qualité
  • Flexibilité
  • Pratique
  • Confidentialité
  • Obtenez un certificat avec des Heures de formation continue
En savoir plus
Top