COURS.

Structural Engineering for Non-Structural Engineers

Webinaire / les 23, 24, 25 et 26 novembre 2020 /
Code : 1133-ONL20

Inscrivez-vous
La confirmation du cours dépend de votre inscription. Inscrivez-vous tôt pour éviter que le cours soit reporté ou annulé.
  • APERÇU
  • PROGRAMME
  • FORMATEUR

APERÇU

Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

10:30 am to 6:30 pm Eastern (Will include the usual breaks)

After participating in this course you will be able to:

  • Apply structural analysis methods to beams, trusses, slabs, columns, walls, frames, footings, and pile foundations
  • Assess the design of reinforced concrete and structural steel members
  • Solve common structural engineering problems
  • Employ wood and masonry design procedures

Description
Non-structural engineers and architects need a basic understanding of structural engineering. This course provides the fundamentals without delving into complicated mathematical formulas. The course covers the design and construction of concrete, steel, wood, and masonry building structures. Lectures will be followed by simple hands-on exercises and problem-solving sessions.

Course Outline

  • Structural loads & procedures
  • Structural analysis
  • Member properties
  • Structural behaviour
  • Reinforced concrete design
  • Structural steel design
  • Wood design
  • Masonry design
  • Building design sample

Who Should Attend
Architects • Non-Structural Engineers (Civil, Mechanical, Electrical, Mining, Chemical & Agricultural) • Plant Engineers • Fabricators & Manufacturers of Structural Systems • General Contractors • Property Managers • Directors of Physical Plants • Municipal Building Officials • Building Inspectors • Field Review Personnel • Project Engineers • Others wanting to know more about Structural Systems

Course participants are expected to have some elementary knowledge about structural design and the analysis of simple structures. •In order to gain the maximum benefit from this seminar, participants are encouraged to read the following texts in advance: •Part 4 of the National Building Code of Canada •Structural Commentaries (Part 4) of the National Building Code of Canada •Participants should have a hand-held, battery-operated calculator for the exercises at the end of each day.

Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

10:30 am to 6:30 pm Eastern (Will include the usual breaks)

Horaire : 10:30 AM - 6:30 PM EDT

Exigences techniques Pour les utilisateurs de PC
OS: Windows XP, 2003 Server, Vista, 7, 8, 10
Navigateur :
Internet Explorer 7.0 ou plus récent
Mozilla Firefox 4.0 ou plus récent
Google Chrome 5.0 ou plus récent

Pour les utilisateurs de Macintosh
OS: Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion) ou plus récent
Navigateur :
Safari 3.0 ou plus récent
Mozilla Firefox 4.0 ou plus récent
Google Chrome 5.0 ou plus récent

iOS
Appareil :
iPad 1 ou plus récent, iPhone 3GS ou plus récent, iPod Touch (3rd generation) ou plus récent
OS: iOS 6 ou plus récent

Android
OS: Android 2.2 ou supérieur

voir le programme complet

PROGRAMME

Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

10:30 am to 6:30 pm Eastern (Will include the usual breaks)

Day I

Welcome, Introduction, Workshop Preview, Learning Outcomes, and Assessment Method

Structural Loads and Procedures

  • NBC section 4.0
  • Specified loads
  • Limit states design

Structural Analysis

  • Applied loads
  • Equilibrium and free body diagrams
  • Determinant and in-determinant structures
  • Axial load, shear, and bending

Member Properties

  • Cross sectional area
  • Moment of inertia
  • Section modulus
  • Composite construction
  • Strength
  • Stiffness

Structural Behaviour

  • Slabs, beams, and trusses
  • Walls and columns
  • Frames
  • Basement walls
  • Footings
  • Retaining walls
  • Pile foundations

Day II

Reinforced Concrete Design

  • Products, properties, and failure modes
  • Design standards
  • Slabs
  • Beams
  • Columns
  • Shear walls
  • Basement walls
  • Footings
  • Retaining walls
  • Concrete piles (caissons)
  • Prestressed concrete
  • Precast concrete
  • Corrosion protection
  • Fire resistance
  • Concrete repairs

Day III

Structural Steel Design

  • Products, properties and failure modes
  • Design standards
  • Beams
  • Columns
  • Tension members
  • Steel joists and trusses
  • Bracing
  • Connections
  • Composite design
  • Steel deck
  • Steel piles
  • Corrosion protection
  • Fire protection

Day IV

Wood Design

  • Products, properties, and failure modes
  • CSA 086.1 design standard
  • “Part 9” design method
  • Beams and joists
  • Columns and studs
  • Trusses
  • Panels
  • Connections
  • Wood frame construction
  • Decay protection
  • Fire protection

Masonry Design

  • Products, properties, and failure modes
  • Design standards
  • Walls and columns
  • Beams and lintels
  • Shear walls
  • Common problems and solutions

Building Design Sample

Questions and Answers, Feedback on Achievement of Learning Outcomes

FORMATEUR

Mohamed Khalil, Ph.D., P.Eng., MBA

Dr. Mohamed Khalil has over 20 years of experience in concrete and steel design, and is the founder and director/manager of Stenvro Engineering Inc.

He previously worked as a marketing manager for aircraft and aircraft components at both Pratt and Whitney Canada, and Bombardier Aerospace. At Pratt and Whitney Canada, Dr. Khalil was a specialist in designing critical rotating structures under high and low cycle fatigue loading. He has also been involved in designing many projects for Ford Motor Company, MascoTech Inc., Kobelco Metal Powder of America Inc., and the American Iron and Steel Institute. His projects have included high-rise buildings, underground metro stations, education centers, education residences and steel factories.

Dr. Khalil has instructed many courses in the area of engineering, engineering economics and engineering management at educational institutes and universities. A co-author for many technical journal papers, he has delivered scientific and marketing presentations in technical symposiums around the world. He is also a technical reviewer for international scientific journals. Dr. Khalil obtained his M.A.Sc. and PhD from the University of Waterloo, and he also completed his Master of Business Administration at Rotman School of Management at the University of Toronto.



INSCRIVEZ-VOUS
VOUS N’ÊTES PAS INTERESSÉ PAR CE COURS ?

Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).

Svp cochez cette case :
Note d’évaluation pour cette formation
4.3 sur 5

Évaluation globale de ce cours par ses participants précédents !

UNITÉS & FRAIS
  • 2,8 Unités de formation continue (UFC)
  • 28 Heures de développement professionnel (HDP)

2595 $ (+ TPS/TVQ)

Inscrivez-vous




Accumulez vos
UFC / HDP

Tous les cours du CIPE vous permettent d’obtenir vos UFC / HDP ; utiles pour ceux qui doivent accumuler et soumettre leurs HDP comme l’exige l’Ordre des ingénieurs du Québec.

Ces exigences de formation prennent fin le 31 mars 2021 !

VOIR LES COURS
ABONNEZ-VOUS POUR RESTER BIEN INFORMÉ

Ne pas manquer cette
occasion !

Recevez les dernières offres, des rapports liés à l'industrie, l'offre des cours à venir, et plus - tout simplement en vous inscrivant ci-dessous.

Abonnez-vous
Formation en entreprise

Les AVANTAGES de la formation en entreprise :

  • Efficacité et coût
  • Des cours de grandes qualité
  • Flexibilité
  • Pratique
  • Confidentialité
  • Offre des UFC / HDP (Unités de formation continue / Heures de développement professionnel). Obtenez un certificat avec des unités de formation continue (UFC). Une UFC vaut 10 HDP (Heures de développement professionnel).
En savoir plus
Top