COURS.

Electrical Engineering for Non-Electrical Engineers

Webinaire / les 17, 18 et 19 novembre 2020 /
Code : 1121-ONL20

Inscrivez-vous
La confirmation du cours dépend de votre inscription. Inscrivez-vous tôt pour éviter que le cours soit reporté ou annulé.
  • APERÇU
  • PROGRAMME
  • FORMATEUR

APERÇU

Veuillez noter :
This course is held online over 3 days on the following schedule (All times in Eastern Time Zone):

9:00 am to 3:15 pm Eastern (Will include the usual breaks)

After participating in this course you will be able to:

  • Understand and apply electrical code requirements
  • Design electrical systems in compliance with the code
  • Broaden your knowledge of electrical equipment, wire and cable applications
  • Relate electrical code to grounding and bonding requirements
  • Determine the code requirements for motor applications, substations, and high voltage lines

Description
This course focuses on basic electrical design concepts that will meet the demands of industrial and commercial design, construction, and maintenance. In addition to familiarizing participants with basic electrical circuits and circuit parameters, the course provides a general understanding of the methods used to design low voltage power distribution systems (600 volts or less).

The course will emphasize the Canadian Electrical Code while introducing the basics of electrical generation, transmission and distribution, design philosophy and procedures, construction materials, services, grounding, and power quality.

Course Outline

  • Electric power & circuit fundamentals
  • Power quality
  • Major electrical equipment
  • Electrical power generation
  • Load characteristics & conductor sizing
  • Fault calculation & protection system
  • Standards & codes
  • Design procedures
  • Motor branch circuit design
  • Feeder circuit design

Who Should Attend
Non-Electrical Engineers • Project Engineers • Operations & Maintenance Engineers • Managers • Construction personnel • Plant & Facility Engineers • Inspectors & Municipal personnel • Electrical Contractors



Veuillez noter :
This course is held online over 3 days on the following schedule (All times in Eastern Time Zone):

9:00 am to 3:15 pm Eastern (Will include the usual breaks)

Horaire : 9:00 AM - 3:15 PM EDT

Exigences techniques Pour les utilisateurs de PC
OS: Windows XP, 2003 Server, Vista, 7, 8, 10
Navigateur :
Internet Explorer 7.0 ou plus récent
Mozilla Firefox 4.0 ou plus récent
Google Chrome 5.0 ou plus récent

Pour les utilisateurs de Macintosh
OS: Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion) ou plus récent
Navigateur :
Safari 3.0 ou plus récent
Mozilla Firefox 4.0 ou plus récent
Google Chrome 5.0 ou plus récent

iOS
Appareil :
iPad 1 ou plus récent, iPhone 3GS ou plus récent, iPod Touch (3rd generation) ou plus récent
OS: iOS 6 ou plus récent

Android
OS: Android 2.2 ou supérieur

voir le programme complet

PROGRAMME

Veuillez noter :
This course is held online over 3 days on the following schedule (All times in Eastern Time Zone):

9:00 am to 3:15 pm Eastern (Will include the usual breaks)

Day I

Welcome, Introduction, Workshop Preview, Learning Outcomes, and Assessment Method

Introduction to Electrical Engineering

Electric Power Fundamentals

  • Basic electrical units
  • Circuit arrangement
  • Alternating current relation
  • Transformers
  • Voltage terminology and standards

Electric Circuits Fundamentals

  • AC circuit theory
  • Single phase and three phase systems
  • Inductance, capacitance, and impedance
  • Active power, reactive power, and power factor
  • Examples

Power Quality

  • Introduction
  • Types of disturbances
  • Power quality monitoring
  • Power quality mitigation techniques

Major Electrical Equipment

  • Generators
  • Transformers
  • Motors
  • Capacitors
  • Lighting
  • Switchgears
  • Electrical construction materials

Day II

System Design Philosophy

Electrical Power Generation, Transmission, and Distribution

  • Fundamentals of power generation, transmission, and distribution
  • Substation concept
  • Overhead vs. underground cables
  • One-line diagrams

Load Characteristics and Conductor Sizing Consideration

  • Load characteristics
  • Load study/possible loads
  • Ampacity tables
  • Voltage regulation calculations

Fault Calculation and Protection System Fundamentals

  • Fault types
  • Fault calculations
  • Protection system fundamentals
  • Over-current coordination

Standards, Recommended Practices, Guides, and Codes

  • Introduction to Canadian Electrical Code
  • Key relevant sections of the Canadian Electrical Code

Day III

Design Procedures

Lighting and Non-motor Branch Circuit Design

  • Harmonics consideration
  • CEC requirements
  • Circuit protection
  • Calculations

Motor Branch Circuit Design

  • Electric Motors
  • CEC requirements
  • Motor protection
  • Circuit protection
  • Calculations

Feeder Circuit Design

  • CEC requirements
  • Circuit protection
  • Calculations

Service Design

  • Commercial/industrial examples
  • CEC constraints
  • Utility constraints
  • Equipment
  • Switchboards
  • Metering: CTs, PTs

Questions and Answers, Feedback on Achievement of Learning Outcomes

FORMATEUR

Khaled Akida, P.Eng., MBA, M.Sc.

Khaled is a registered professional engineer and general manager of TEEBA Engineering Inc. He has extensive experience in substation design, power system studies, power quality audits, EMF and grounding design, field testing and EHS program settings.

Khaled received his M.Sc. from The University of New Brunswick and his MBA from Laurier School of Business. He has managed and executed various electrical engineering projects for major electrical, industrial and commercial facilities in Canada and the US.

He has various IEEE publications, is a technical reviewer for many IEEE journals and is a certified electrical safety trainer for GE. Khaled has been the recipient of GE Management Award and has many leadership certifications from GE Leadership Development Centre at Crotonville.

As a certified electrical safety trainer by GE Corporate, Khaled has taught many technical courses across Canada, USA, Asia and Middle East to industrial customers, electrical consultants and electrical utilities customers.



INSCRIVEZ-VOUS
VOUS N’ÊTES PAS INTERESSÉ PAR CE COURS ?

Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).

Svp cochez cette case :
Note d’évaluation pour cette formation
4.3 sur 5

Évaluation globale de ce cours par ses participants précédents !

UNITÉS & FRAIS
  • 1,5 Unités de formation continue (UFC)
  • 15 Heures de développement professionnel (HDP)

1995 $ (+ TPS/TVQ)

Inscrivez-vous




Accumulez vos
UFC / HDP

Tous les cours du CIPE vous permettent d’obtenir vos UFC / HDP ; utiles pour ceux qui doivent accumuler et soumettre leurs HDP comme l’exige l’Ordre des ingénieurs du Québec.

Ces exigences de formation prennent fin le 31 mars 2021 !

VOIR LES COURS
ABONNEZ-VOUS POUR RESTER BIEN INFORMÉ

Ne pas manquer cette
occasion !

Recevez les dernières offres, des rapports liés à l'industrie, l'offre des cours à venir, et plus - tout simplement en vous inscrivant ci-dessous.

Abonnez-vous
Formation en entreprise

Les AVANTAGES de la formation en entreprise :

  • Efficacité et coût
  • Des cours de grandes qualité
  • Flexibilité
  • Pratique
  • Confidentialité
  • Offre des UFC / HDP (Unités de formation continue / Heures de développement professionnel). Obtenez un certificat avec des unités de formation continue (UFC). Une UFC vaut 10 HDP (Heures de développement professionnel).
En savoir plus
Top