COURS.

Testing, Commissioning and Maintenance of Electrical Systems

Webinaire / les 30 novembre - 3 décembre 2020 /
Code : 11-0912-ONL20

Inscrivez-vous
La confirmation du cours dépend de votre inscription. Inscrivez-vous tôt pour éviter que le cours soit reporté ou annulé.
  • APERÇU
  • PROGRAMME
  • FORMATEUR

APERÇU

Veuillez noter :
This course is held online over 4 days (November 23, 24, 25 and 26, 2020) on the following schedule (All times in Eastern Time Zone):

10:30 am to 4:45 pm Eastern

After participating in this course, you will be able to:

  • Describe how to plan, control and implement commissioning of electrical systems
  • Discuss the performance specifications, which can be economically verified
  • Pick out the field tests for electrical distribution systems, generator and motors, transformers, switchgear and cables
  • Select among corrective, preventive and preventive maintenance for your electric power distribution system
  • Explain the AC and DC testing of electrical equipment and specify the handover, acceptance and transition to operations

Description
This course provides guidelines to anyone who wishes to know and understand the role of commissioning in a project, whatever its size. The importance of planning and preparation for the project, from engineering to commissioning and start up, will be emphasized. This course deals with safety considerations in maintenance and testing procedures for all the components of any electrical system. It also discusses field testing of all the major components of an electrical system such as motors, generators, switchgear, protection and control, UPS and battery systems.

Course Outline:

  • AC & DC voltage testing techniques
  • Testing of motors & generators
  • Transformers & switchgear
  • Cables & accessories
  • Battery system & protective relay system
  • Power distribution system maintenance
  • Grounding, ground resistance measurement
  • Insulating oils, fluids & gases
  • Electrical safety & precautions
  • Overview of commissioning

Who Should Attend
Design Engineers • Electrical Engineers • Commissioning & Testing Engineers • Consulting Engineers • Electrical Technologists • Project Managers • Project Engineers • Plant Managers • Operating & Maintenance Personnel



Veuillez noter :
This course is held online over 4 days (November 23, 24, 25 and 26, 2020) on the following schedule (All times in Eastern Time Zone):

10:30 am to 4:45 pm Eastern

Horaire : 10:30 AM - 4:45 PM EDT

Exigences techniques Pour les utilisateurs de PC
OS: Windows XP, 2003 Server, Vista, 7, 8, 10
Navigateur :
Internet Explorer 7.0 ou plus récent
Mozilla Firefox 4.0 ou plus récent
Google Chrome 5.0 ou plus récent

Pour les utilisateurs de Macintosh
OS: Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion) ou plus récent
Navigateur :
Safari 3.0 ou plus récent
Mozilla Firefox 4.0 ou plus récent
Google Chrome 5.0 ou plus récent

iOS
Appareil :
iPad 1 ou plus récent, iPhone 3GS ou plus récent, iPod Touch (3rd generation) ou plus récent
OS: iOS 6 ou plus récent

Android
OS: Android 2.2 ou supérieur

voir le programme complet

PROGRAMME

Veuillez noter :
This course is held online over 4 days (November 23, 24, 25 and 26, 2020) on the following schedule (All times in Eastern Time Zone):

10:30 am to 4:45 pm Eastern

Day I

Welcome, Introduction, Workshop Preview, Learning Outcomes and the Assessment Method

Overview of Field Test Requirements

  • Development of test regime
  • Outline of typical tests
  • Interpretation of test results
  • Troubleshooting

Basic Electrical Theory

  • DC circuits basics
  • AC circuit laws
  • Impedance and power factor
  • Bridge methods

DC Voltage Testing Techniques

  • Insulation resistance tests
  • Step voltage and high voltage tests
  • Testing power factor correcting capacitors

AC Voltage Testing Techniques

  • Power factor and dissipation factor tests
  • AC high potential test
  • Safety precautions

Insulating Oils, Fluids and Gases

  • Deterioration of oil
  • Oil testing and analysis
  • interpretation of test values
  • Reconditioning used oil
  • Insulating gases

Transformers

  • Polarity, terminal markings and connections
  • Dry type transformers: inspection, and acceptance tests
  • Liquid type transformer: inspection, and acceptance tests
  • Routine testing: AC high potential testing, TTR test, polarity test, induced potential test, polarization recovery voltage test, and DC winding resistance tests

DAY II

Testing of Motors and Generators

  • Insulation resistance
  • High potential test
  • Power factor test
  • Dissipation factor
  • Voltage surge comparison testing

Lightning Protection

  • Testing and commissioning of lightning arrestors and over-voltage arrestors

Switchgear

  • Insulation resistance measurement test
  • DC or AC high potential testing
  • Power factor or dielectric loss test
  • Circuit breaker contact resistance test

Cables and Accessories

  • Insulation resistance measurement test
  • DC over potential testing
  • Voltage versus leakage current
  • Power factor test
  • Cable fault locating

Battery System

  • Tests for acceptance
  • Performance
  • Service
  • Connection resistance
  • Impedance tests

DAY III

Protective Relay Systems

  • Classifications of current transformers
  • CT accuracy classes (metering, relaying)
  • Testing instrument transformers (CT, VT)
  • Testing protective relays

Power System Grounding and Ground Resistance Measurement

  • Solidly grounded, ungrounded and resistance grounded systems
  • Grounding electrodes
  • Factors affecting soil resistivity
  • Methods of ground resistance measurement

Power Quality and Harmonics Monitoring

  • Effects of harmonics on equipment
  • Power quality measurement
  • Recognizing power quality issues
  • Mitigating PQ effects and optimizing energy use
  • Stand by diesel generators and transfer systems

Day IV

Power Distribution System Maintenance

  • Types of maintenance (corrective, preventive and predictive)
  • Canadian Code requirements

Selling Management on the Need for Preventive and Predictive Maintenance Program

Electrical Safety, Arc flash Hazard, Switching Practices and Precautions

  • Lock out and tag out
  • Personal protective equipment
  • Safety grounds

Overview of Commissioning

  • Terminology
  • Objectives
  • Specifications
  • Development of procedures, forms and documentation
  • Interpretation of results

Case Study on Commissioning and Testing

Questions and Answers and Feedback to Participants on Achievement of Learning Outcomes

FORMATEUR

Khaled Akida, P.Eng., MBA, M.Sc.

Khaled is a registered professional engineer and general manager of TEEBA Engineering Inc. He has extensive experience in substation design, power system studies, power quality audits, EMF and grounding design, field testing and EHS program settings.

Khaled received his M.Sc. from The University of New Brunswick and his MBA from Laurier School of Business. He has managed and executed various electrical engineering projects for major electrical, industrial and commercial facilities in Canada and the US.

He has various IEEE publications, is a technical reviewer for many IEEE journals and is a certified electrical safety trainer for GE. Khaled has been the recipient of GE Management Award and has many leadership certifications from GE Leadership Development Centre at Crotonville.

As a certified electrical safety trainer by GE Corporate, Khaled has taught many technical courses across Canada, USA, Asia and Middle East to industrial customers, electrical consultants and electrical utilities customers.



INSCRIVEZ-VOUS
VOUS N’ÊTES PAS INTERESSÉ PAR CE COURS ?

Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).

Svp cochez cette case :
Note d’évaluation pour cette formation
4.4 sur 5

Évaluation globale de ce cours par ses participants précédents !

UNITÉS & FRAIS
  • 2,1 Unités de formation continue (UFC)
  • 21 Heures de développement professionnel (HDP)

1995 $ (+ TPS/TVQ)

Inscrivez-vous




Accumulez vos
UFC / HDP

Tous les cours du CIPE vous permettent d’obtenir vos UFC / HDP ; utiles pour ceux qui doivent accumuler et soumettre leurs HDP comme l’exige l’Ordre des ingénieurs du Québec.

Ces exigences de formation prennent fin le 31 mars 2021 !

VOIR LES COURS
ABONNEZ-VOUS POUR RESTER BIEN INFORMÉ

Ne pas manquer cette
occasion !

Recevez les dernières offres, des rapports liés à l'industrie, l'offre des cours à venir, et plus - tout simplement en vous inscrivant ci-dessous.

Abonnez-vous
Formation en entreprise

Les AVANTAGES de la formation en entreprise :

  • Efficacité et coût
  • Des cours de grandes qualité
  • Flexibilité
  • Pratique
  • Confidentialité
  • Offre des UFC / HDP (Unités de formation continue / Heures de développement professionnel). Obtenez un certificat avec des unités de formation continue (UFC). Une UFC vaut 10 HDP (Heures de développement professionnel).
En savoir plus
Top