COURS.

APERÇU

After participating in this course, you will be able to:

• Identify the main views in an orthographic projection drawing
• Explain the meaning of the different types of lines
• Visualize a 3D object from the 2D orthographic views
• Interpret plus/minus, nominal, reference and limit dimensions
• Explain the various elements found in a title block

Description
This webinar aims to provide participants with the skills and knowledge to interpret the main aspects of a mechanical drawing. Some people have the innate ability to visualize objects in three-dimensional space from a two-dimensional drawing. However, anyone can accomplish this when some basic rules are in place and can even be honed with practice.

The webinar will begin with a discussion of the drawing categories and the meaning of each line type. Then, a significant focus will be placed on interpreting and visualizing orthographic projection. Also covered are auxiliary information on a print (such as the title block and notes), section views, interpreting dimensions/tolerances, other special symbols (such as roughness callouts and screw threads), and an overview of the GD&T system of tolerances. Multiple examples will be provided to show specific applications.

Who Should Attend
Product Engineers • Manufacturing Engineers • Quality/Inspection personnel • Machine Operators • Purchasing & Cost Estimators • Support staff who handle prints

Horaire : 12:00 PM - 2:00 PM EDT

Exigences techniques

Pour les utilisateurs de PC
OS: Windows 7, 8, 10 ou plus récent

Navigateur :
IE 11 ou plus récent, Edge 12 ou plus récent, Firefox 27 ou plus récent, Chrome 30 ou plus récent

Pour les utilisateurs de Macintosh
OS: MacOS 10.7 ou plus récent

Navigateur :
Safari 7+, Firefox 27+, Chrome 30+

iOS
OS: iOS 8 ou plus récent

Android
OS: Android 4.0 ou supérieur

voir le programme complet

PROGRAMME

Course Outline

• Basic steps in reading a print
• Line types: visible, hidden, center, leader, etc.
• The title block
• Orthographic projection views
• Visualizing in 3D
• First vs. third angle projection
• Section views
• Dimensioning practices
• Plus/minus vs. limit dimensions
• Special dimensions/tolerances

FORMATEUR

John-Paul Belanger

As president of Geometric Learning Systems, John-Paul travels throughout North America and Europe to assist corporate groups in implementing proper tolerance design concepts in all engineering and manufacturing phases.

John-Paul has been a full-time consultant in the area of blueprints and tolerances since 1994. He is certified as a Senior-Level GD&T Professional by the American Society of Mechanical Engineers. He holds an aerospace engineering degree from the University of Michigan and specializes in aircraft design and safety.