Layout and Design of Process Plant Equipment and Piping Systems

Webinaire / les 18, 19, 20 et 21 octobre 2022 /
Code : 13-1008-ONL22

La confirmation du cours dépend de votre inscription. Inscrivez-vous tôt pour éviter que le cours soit reporté ou annulé.


Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

9:30 am to 5:30 pm Eastern (Will include the usual breaks)

After participating in this course, you will be able to:

  • Develop practical working knowledge of process equipment and piping systems layout
  • Become familiar with design principles, procedures and best practices
  • Determine the impact of layout and pipe routings options
  • Familiarize yourself with the design and construction codes and standards for piping and process equipment
  • Enhance your knowledge in stress analysis and better appreciate its role in avoiding failures
  • Learn from catastrophic incidents that resulted from poor layout and design

Designing process plants is a complex and demanding process. The design of plant layout is one of the most important tasks before plant construction. A good plant layout can not only reduce capital cost, but can also help to improve the safety of the plant and reduce its environmental impact. Additionally, fast and easy access to the parts of the plant and the equipment is essential for effective operation and maintenance which means higher plant availability and longer time between failures. This course will familiarize participants with all aspects of process plant major equipment and piping systems.

This course will include several class workshops that will include case studies and selected practical real-world examples to be solved in teamwork.

Course Outline:

  • Design and sizing of various process equipment and piping
  • Layout planning of process plant equipment and piping
  • Design standards and code requirements
  • Specifics of the design of piping support systems
  • Piping thermal expansion & flexibility
  • Pipe stress analysis & demonstration of software application
  • Workshops: case studies, examples and solutions

Who Should Attend:
Engineers & Designers involved in Plant Design and Operation Activities • Project Engineers • Process and Piping Engineers • Contractors & Suppliers • Piping Design & Analysis Personnel • Recent Engineering Graduates.

Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

9:30 am to 5:30 pm Eastern (Will include the usual breaks)

Horaire : 9:30 AM - 5:30 PM EDT

Exigences techniques

Pour les utilisateurs de PC
OS: Windows 7, 8, 10 ou plus récent

Navigateur :
IE 11 ou plus récent, Edge 12 ou plus récent, Firefox 27 ou plus récent, Chrome 30 ou plus récent

Pour les utilisateurs de Macintosh
OS: MacOS 10.7 ou plus récent

Navigateur :
Safari 7+, Firefox 27+, Chrome 30+

OS: iOS 8 ou plus récent

OS: Android 4.0 ou supérieur

voir le programme complet


Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

9:30 am to 5:30 pm Eastern (Will include the usual breaks)

DAY-1 Process Plant Layout and Design Principles

  • Principles od Process Plant Design and Layout
  • Design Codes: CSA, ASME, ANSI, NFPA, CFPA
  • Concept of Safety by Design (Inherent Safety)
  • Process Flow (PFD) & Piping & Instrument (P&ID) Diagrams
  • Layout Planning and Design Requirements
  • Site Location, Traffic, Utilities and Business Criteria
  • Safety Considerations and HSE Regulations and Codes
  • Structural, Mechanical and Electrical Aspects of Layout Plan

Day 2 –Process Equipment Layout and Design Approach

  • Process Equipment Selection and Sizing
  • Design Methodologies as Recommended by Standards
  •  HAZOP, LOPA, FMEA Analysis
  • Design and Layout of Pressure Vessels and Storage tanks
  • Design and Layout of Heat Exchangers
  • Design and Layout of Process Heaters and Industrial Boilers
  • Pressure Relief Devices
  • Control Systems and Instrumentation
  • Insulation Technologies and Heat Tracing

Day 3 – Piping Systems Layout and Design Strategies

  • Pipe Sizes and Schedules
  • Piping Design Codes and Standards – ASME B31.1 and B31.3
  • Hydraulic Design - Fluid Flow and Pressure Drop: Pumping
  • Mechanical (Structural) Design: Pressure Integrity
  • Selection of Materials, Fabrication and Welding Techniques
  • Pipe Support Selection and Optimization
  • Piping Thermal Expansion and Design Approach Options
  • Expansion Loops and Expansion Joints
  • Piping Installation and Inspection

Day 4 – Optimization of Process Plant Equipment & Piping Systems Selection

  • Optimization of Process Plant Layout & Equipment Spacing
  • Prediction of Potential Failures of Process Equipment
  • Root Cause Analysis (RCA) of Common Failures
  • Risk Management & Mitigation Technologies: ALARP
  • Equipment Inspection and Repair Technologies
  • Fitness for Service (FFS) Analysis, per API 579
  •  Summary and Conclusions

Questions and Answers and Feedback to Participants on Achievement of Learning Outcomes

Concluding Remarks and Final Adjournment


Mike Ivanovic, Ph.D.

Dr. Mike Ivanovic is President of UBAMIP Consulting, and also former Adjunct Associate Professor with over 30 years of experience in the field of thermal engineering. After working in the consulting group of ANSYS Canada Ltd., he now runs the private consulting company UBAMIP Consulting, dealing with analysis and problem solving in operation of vital stationary and rotating equipment in the process and petrochemical industry. Mike has also been active in providing training technical courses of various levels of complexity for professionals in industry in Canada, USA and overseas.

His area of expertize among others, includes design, operation and maintenance of various types of storage tanks, pressure vessels, piping systems, including pumps and compressors. The focus in the consulting projects has been on the risk assessment during operation and maintenance activities, as well as equipment failure analysis and accident prevention technologies based on the results of inspection and fitness for service studies.


Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).

Svp cochez cette case :
Note d’évaluation pour cette formation
4.5 sur 5

Évaluation globale de ce cours par ses participants précédents !

  • 28 Heures de formation continue

2595 $ (+ TPS/TVQ)



Tous les cours du CIPE vous permettent d’obtenir vos Heures de formation continue ; utiles pour ceux qui doivent accumuler et soumettre leurs Heures comme l’exige l’Ordre des ingénieurs du Québec.

Ces exigences de formation prennent fin le 31 mars 2023 !

Abonnez-vous à notre bulletin électronique
Formation en entreprise

Les AVANTAGES de la formation de groupe en ligne :

  • Efficacité et coût
  • Des cours de grandes qualité
  • Flexibilité
  • Pratique
  • Confidentialité
  • Obtenez un certificat avec des Heures de formation continue
En savoir plus