COURS.

Plumbing Systems Design for Multi-Residential, Commercial, Industrial and Institutional Buildings

Webinaire / les 28 et 29 août 2024 /
Code : 15-0812-ONL24

Inscrivez-vous
La confirmation du cours dépend de votre inscription. Inscrivez-vous tôt pour éviter que le cours soit reporté ou annulé.
  • APERÇU
  • PROGRAMME
  • FORMATEUR

APERÇU

Veuillez noter :
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):

10 am to 6 pm Eastern (Will include the usual breaks)

After participating in this course, you will be able to:

  • Know the key design considerations for building plumbing systems
  • Apply codes and standards
  • Make sound materials selection decisions
  • Select specific equipment and corresponding piping
  • Understand why and when specialized piping is used

Description
This course is a comprehensive review of plumbing systems design. It is intended for professional engineers and technologists responsible for plumbing system design in commercial, industrial, institutional, and multi-residential buildings.

Course topics include everything you need for designing a commercial plumbing system, from drain, waste and vent systems to domestic hot and cold water distribution systems. The course will cover sizing, layout and selection of all plumbing systems and their ancillary components, such as pumps and pressure booster systems, valves, piping, water heaters, and backflow preventers.

Course Outline

  • Theory of fixture, sewer, vent & drain pipe
  • Sewers &d rains: fixtures, drains & vents
  • Domestic hot & cold water piping systems
  • Domestic water ancillary systems
  • Sump & ejector pumps
  • Hydronic systems
  • Cross-connection control & backflow prevention
  • Valves
  • Plumbing system materials selection
  • Case Study: Plumbing system design

Who Should Attend
Plumbing Designers • Mechanical Design Engineers & Technologists • Plant Supervisors • Maintenance personnel • Building Officials & Inspectors • Operators & Contractors



Veuillez noter :
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):

10 am to 6 pm Eastern (Will include the usual breaks)

Horaire : 10:00 AM - 6:00 PM EDT

Exigences techniques

Pour les utilisateurs de PC
OS: Windows 7, 8, 10 ou plus récent

Navigateur :
IE 11 ou plus récent, Edge 12 ou plus récent, Firefox 27 ou plus récent, Chrome 30 ou plus récent

Pour les utilisateurs de Macintosh
OS: MacOS 10.7 ou plus récent

Navigateur :
Safari 7+, Firefox 27+, Chrome 30+

iOS
OS: iOS 8 ou plus récent

Android
OS: Android 4.0 ou supérieur

voir le programme complet

PROGRAMME

Veuillez noter :
This course is held online over 2 days on the following schedule (All times in Eastern Time Zone):

10 am to 6 pm Eastern (Will include the usual breaks)

Day I

Welcome, Introductions, Seminar Preview and Learning Outcomes

Theory of Fixture, Sewer, Vent, and Drain Pipe Sizing

  • Drainage systems
  • Soil and waste stacks
  • Stormwater
  • Piping layout suggestions
  • Traps
  • Vent systems
  • Building code requirements

Sewers and Drains: Fixtures, Drains, and Vents

  • System layout
  • Fixture diagrams
  • Approved methods of venting
  • Interceptors: grease, oil, and other
  • Designing to building code requirements

Domestic Hot and Cold Water Piping Systems

  • Pipe size
  • Piping expansion
  • Shock absorbers
  • Piping layout suggestions
  • Building code requirements

Domestic Water Ancillary Systems

  • Strainers
  • Pressure reducing valves
  • Relief valves
  • Domestic water booster systems and their selection
  • Water treatment: softeners, RO units, iron removal

Sump and Ejector Pumps

  • Types
  • Pump curves
  • Selection and applications
  • Sump sizes and accessories

Day II

Hydronic Systems

  • Selection of domestic water heaters and storage systems
  • Hot water circulating systems and their selection

Cross Connection Control and Backflow Prevention

  • Definitions
  • Public health hazards
  • Theory of backflow, back siphonage
  • Backflow prevention equipment
  • Cross-connection: how it occurs, how to control it

Valves

  • Various types of valves available
  • Pressure and temperature ratings (WOG, other)
  • Codes and standards
  • Materials available
  • Recommended uses
  • Leakage ratings and seals
  • Building code requirements

Plumbing System Materials Selection

Part I: Copper Tubing

  • Types of tubing available
  • Pressure and temperature ratings
  • Weights and sizes
  • Fittings-types and assembly
  • Codes and standards
  • Uses (systems)
  • Expansion and compensation
  • Fluid friction charts or tables
  • Erosion and corrosion factors

Plumbing System Materials Selection

Part II: Plastic Piping for Waste, Vent, Drains, Sewers, and Water (Interior and Exterior)

  • Types of tubing available
  • Pressure and temperature ratings
  • Weights and sizes
  • Fittings-types and assembly
  • Codes and standards
  • Uses (systems)
  • Expansion and compensation
  • Fluid friction charts or tables
  • Erosion and corrosion factors

Case Study: Plumbing System Design

A description of the network and subnets for cold and hot water, sewer, drain, vent pipes and special fixtures.

Questions and Answers, Feedback on Achievement of Learning Outcomes

FORMATEUR

John F. Daly, PE, LEED AP, CPD, CBIE

John is a professional engineer and certified plumbing designer. With over 35 years of professional experience, he is currently Vice President/Director of Mechanical/Plumbing Engineering with Trautman Associates, a 50-person architecture and engineering firm headquartered in Buffalo, NY. As vice-president of Trautman Associates,

Mr. Daly is the director of the Building Systems Group. He is also a member of ASPE (American Society of Plumbing Engineers) and a frequent speaker and instructor for schools and industry groups.



INSCRIVEZ-VOUS
VOUS N’ÊTES PAS INTERESSÉ PAR CE COURS ?

Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).

Svp cochez cette case :
Note d’évaluation pour cette formation
4.1 sur 5

Évaluation globale de ce cours par ses participants précédents !

UNITÉS & FRAIS
  • 14 Heures de formation continue

1295 $ (+ TPS/TVQ)

Inscrivez-vous




Accumulez vos heures de formation continue avec le CIPE

Tous les cours du CIPE vous permettent d’obtenir vos Heures de formation continue; utiles pour ceux qui doivent accumuler et soumettre leurs Heures comme l’exige l’Ordre des ingénieurs du Québec (OIQ) et l’Ordre des technologues professionnels du Québec (OTPQ).

Ces exigences de formation prennent fin le 31 mars 2025 pour l’OIQ et le 30 avril 2025 pour l’OTPQ !

VOIR LES COURS
Abonnez-vous à notre bulletin électronique
Formation en entreprise

Les AVANTAGES de la formation de groupe en ligne :

  • Efficacité et coût
  • Des cours de grandes qualité
  • Flexibilité
  • Pratique
  • Confidentialité
  • Obtenez un certificat avec des Heures de formation continue
DEMANDER UNE PROPOSITION
Top