COURS.

Process Equipment and Piping Systems: Application, Design and Operation

Webinaire / les 6, 7, 8 et 9 mai 2024 /
Code : 15-0509-ONL24

Inscrivez-vous
  • APERÇU
  • PROGRAMME
  • FORMATEUR

APERÇU

Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

10:00 am to 6:00 pm Eastern (Will include the usual breaks)

After participating in this course, you will be able to:

  • Understand equipment design methods based on existing world standards
  • Apply HAZOP, LOPA, and FMEA analysis during design and operation
  • Perform Risk-Based Inspection and analyze results
  • Perform fitness for Service (FFS) analysis
  • Make the run/repair/replace decisions

Description
Components of process equipment and piping systems are subjected to hazardous service conditions and damage mechanisms. This course will enable technical personnel to become familiar with suitable design methods, the selection of quality engineering materials, and the procedures for monitoring and inspecting equipment to detect and assess any damage and malfunction in operation.

The course will present the approach based on a criticality list, including risk-based inspection and corresponding tests focusing on failure mechanisms and prevention techniques. This course will also cover practical aspects of equipment safe and efficient operation, maintenance, and repair techniques, as well as the method of calculation of equipment remaining life.

This course will have several class workshops, including case studies and selected practical, real-world examples to solve in teamwork.

Course Outline

  • Equipment Safety in Design and Operation
  • HAZOP, LOPA, FMEA Analysis
  • Main Design Standards: ASME BPV Sec VIII, ASME B31.3
  • Safety Conditions in Operation and Maintenance
  • Pressure Vessels, Storage Tanks and Piping Systems
  • Industrial Boilers and Heat Exchangers
  • Pumps, Compressors, Turbines
  • Failure Prevention Techniques
  • Risk-Based Inspection: API 580
  • Best Practices for Maintenance and Repairs

Who Should Attend
Professional and technical personnel in petrochemical, process, power, and other industries • Mechanical engineers • Process engineers • Project engineers • Technical personnel involved in the operation, inspection, and maintenance of the plant.



Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

10:00 am to 6:00 pm Eastern (Will include the usual breaks)

Horaire : 10:00 AM - 6:00 PM EDT

Exigences techniques

Pour les utilisateurs de PC
OS: Windows 7, 8, 10 ou plus récent

Navigateur :
IE 11 ou plus récent, Edge 12 ou plus récent, Firefox 27 ou plus récent, Chrome 30 ou plus récent

Pour les utilisateurs de Macintosh
OS: MacOS 10.7 ou plus récent

Navigateur :
Safari 7+, Firefox 27+, Chrome 30+

iOS
OS: iOS 8 ou plus récent

Android
OS: Android 4.0 ou supérieur

voir le programme complet

PROGRAMME

Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):

10:00 am to 6:00 pm Eastern (Will include the usual breaks)

DAY 1: Process Equipment Design Methods and Standards

  • Safety in the Design of Process Equipment
  • Design Standards: CSA, ASME, API, ISO
  • Estimate of Hazard and Risk of Equipment: HAZOP, LOPA, FMEA
  • Optimization in Design and Operation of Equipment: Constraints
  • Safety Conditions in Operation and Maintenance
  • Reliability and Availability Analysis of Process Equipment
  • Workshop: Case Studies, Examples and Solutions

DAY 2: Design and Safe Operation of Stationary Pressure and Thermal Equipment

  • Pressure Vessels
  • Aboveground Storage Tanks
  • Piping Systems and Pipelines
  • Pressure Safety Devices
  • Heat Exchangers
  • Industrial Boilers and Process Heaters
  • Workshop: Case Studies, Examples and Solutions

DAY 3: Design and Efficient Operation of Fluid Moving Equipment

  • Centrifugal and Positive Displacement Pumps
  • Centrifugal and Reciprocating Compressors
  • Fans and Blowers
  • Gas and Steam Turbines
  • Condition Monitoring and Maintenance of Rotating Machinery
  • Workshop: Case Studies, Examples and Solutions

DAY 4: Equipment Degradation and Failure Analysis

  • Material Degradation Mechanisms and Consequences
  • Equipment Failure Analysis
  • Best Industrial Practices for Failure Prevention
  • Risk-Based Inspection and Testing
  • Fitness for Service (FSS) Analysis as per API 579
  • Maintenance and Repair Strategies and Best Practices
  • Workshop: Case Studies, Examples and Solutions

FORMATEUR

Mike Ivanovic, Ph.D.

Dr. Mike Ivanovic is the President of UBAMIP Consulting and a former Adjunct Associate Professor with over 30 years of experience in thermal engineering. After working in the consulting group of ANSYS Canada Ltd., he now runs the private consulting company UBAMIP Consulting, dealing with analysis and problem-solving in the operation of vital stationary and rotating equipment in the process and petrochemical industry. Mike has also been active in providing training technical courses of various levels of complexity for professionals in the industry in Canada, the USA and overseas.

His expertise, among others, includes the design, operation and maintenance of various types of storage tanks, pressure vessels, piping systems, and pumps and compressors. The focus of the consulting projects has been on risk assessment during operation and maintenance activities, as well as equipment failure analysis and accident prevention technologies based on inspection results and fitness for service studies.



INSCRIVEZ-VOUS
VOUS N’ÊTES PAS INTERESSÉ PAR CE COURS ?

Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).

Svp cochez cette case :
Note d’évaluation pour cette formation
4.5 sur 5

Évaluation globale de ce cours par ses participants précédents !

UNITÉS & FRAIS
  • 28 Heures de formation continue

2595 $ (+ TPS/TVQ)

Inscrivez-vous




Accumulez vos heures de formation continue avec le CIPE

Tous les cours du CIPE vous permettent d’obtenir vos Heures de formation continue; utiles pour ceux qui doivent accumuler et soumettre leurs Heures comme l’exige l’Ordre des ingénieurs du Québec (OIQ) et l’Ordre des technologues professionnels du Québec (OTPQ).

Ces exigences de formation prennent fin le 31 mars 2025 pour l’OIQ et le 30 avril 2025 pour l’OTPQ !

VOIR LES COURS
Abonnez-vous à notre bulletin électronique
Formation en entreprise

Les AVANTAGES de la formation de groupe en ligne :

  • Efficacité et coût
  • Des cours de grandes qualité
  • Flexibilité
  • Pratique
  • Confidentialité
  • Obtenez un certificat avec des Heures de formation continue
DEMANDER UNE PROPOSITION
Top