COURS.

Pumps and Pipe Systems - Features and Technology

Webinaire / les 17, 18, 19 et 20 novembre 2020 /
Code : 1124-ONL20

Inscrivez-vous
La confirmation du cours dépend de votre inscription. Inscrivez-vous tôt pour éviter que le cours soit reporté ou annulé.
  • APERÇU
  • PROGRAMME
  • FORMATEUR

APERÇU

Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):
Nov 17-19: 10:30 am to 4:30 pm Eastern (Will include the usual breaks)
Nov 20: 10:30 am - 5:30 pm Eastern (Will include the usual breaks)

After participating in this course, you will be able to:

  • Familiarize with performance characteristics of centrifugal pumps
  • Apply pipe system standards and codes for design safety of operation
  • Perform calculation of pipe flow, pressure drop and pumping power
  • Understand procedure for inspection of piping systems
  • Follow the best practices for maintenance and repair of piping systems

Description

The reliable operation of pumps and mechanical integrity of piping systems is essential to the cost-effective operation of industrial facilities. This course will present the technical characteristics and functioning of all types of pumps with the focus on centrifugal pumps. Calculation of fluid flow and pressure drop in piping system will be explained in detail, as well as selection of the right pump for the given application. Best practices for efficient operation and maintenance of pumps and piping systems will be discussed.

This course will have several class workshops that will include case studies and selected practical real-world examples to be solved in teamwork.

Course Outline:

  • Fluid Flow in Pipes and Pumps
  • Positive Displacement Pumps
  • Centrifugal Pumps
  • Cavitation Prevention Methods
  • Pump Selection and Installation
  • Pipe Connections & Systems
  • Pump & Pipe Condition Monitoring
  • Maintenance of Pumps & Pipe Systems

Who Should Attend

Plant & Facilities managers • Engineers • Technicians & Supervisors who need to be familiar with the fundamentals associated with pumps and pipe systems • Plant & facilities operations personnel• Managers • engineers • Technicians & Supervisors responsible for plants and facilities• Stationary Engineers • Consultants & Contractors • Personnel in the food, chemical, petrochemical, pulp and paper, pharmaceutical, water utility and energy industries will find this course of particular interest.



Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):
Nov 17-19: 10:30 am to 4:30 pm Eastern (Will include the usual breaks)
Nov 20: 10:30 am - 5:30 pm Eastern (Will include the usual breaks)

Horaire : 10:30 AM - 5:30 PM EDT

Exigences techniques Pour les utilisateurs de PC
OS: Windows XP, 2003 Server, Vista, 7, 8, 10
Navigateur :
Internet Explorer 7.0 ou plus récent
Mozilla Firefox 4.0 ou plus récent
Google Chrome 5.0 ou plus récent

Pour les utilisateurs de Macintosh
OS: Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion) ou plus récent
Navigateur :
Safari 3.0 ou plus récent
Mozilla Firefox 4.0 ou plus récent
Google Chrome 5.0 ou plus récent

iOS
Appareil :
iPad 1 ou plus récent, iPhone 3GS ou plus récent, iPod Touch (3rd generation) ou plus récent
OS: iOS 6 ou plus récent

Android
OS: Android 2.2 ou supérieur

voir le programme complet

PROGRAMME

Veuillez noter :
This course is held online over 4 days on the following schedule (All times in Eastern Time Zone):
Nov 17-19: 10:30 am to 4:30 pm Eastern (Will include the usual breaks)
Nov 20: 10:30 am - 5:30 pm Eastern (Will include the usual breaks)

DAY-1: Pumps: Overview and General Design Characteristics

  • Overview of Pumps and Pumping Systems
  • Fluid Flow in Pumps and Pipes
  • Standards and Codes
  • Positive Displacement Pumps: Reciprocating and Rotary
  • Centrifugal Pumps: System Curves, H-Q, NPSH and BHP
  • Cavitation Prevention by Design of Suction Piping
  • Pumps Operating in Parallel and in Series
  • Workshop: Case study, Examples and Solutions

DAY-2: Pump Operation and Maintenance

  • Pump Design Elements: Impellers, Shafts, Seals, Bearings
  • Operating Practices: Flow Control, Efficiency and Power Usage
  • Operating Considerations: Efficiency and Power Consumption
  • Pump Condition Monitoring
  • Preventive Maintenance Program: Organization and Costs
  • Guidelines for Pump Installation and Commissioning
  • Pump Selection for Special Applications
  • Workshop: Case study, Examples and Solutions

DAY-3: Piping Systems and Structures

  • Overview of Industrial Piping
  • Characteristics of Fluids and Flow in Pipes
  • Pipe Sizes and Flow Diagrams (P&ID and PFD)
  • Pipe Standards and Codes
  • Selection of Pipe Materials and Pipe Connections
  • Pipe Stresses Reduction
  • Workshop: Case study, Examples and Solutions

DAY-4: Piping Systems Operation, Inspection & Maintenance

  • Piping System Accessories: Valves, Filters, Strainers
  • Pipe Supports and Optimization
  • Piping System Insulation and Protection
  • Problems in Operation: Transients
  • Inspection, Maintenance and Repairs
  • Workshop: Case study, Examples and Solutions
  • Summary and Concluding remarks

FORMATEUR

Mike Ivanovic, Ph.D.

Dr. Mike Ivanovic is President of UBAMIP Consulting, and also a former Adjunct Associate Professor at U of Toronto.

After working in the consulting group of ANSYS Canada Ltd., he now runs the private consulting company UBAMIP Consulting in Waterloo.

Mike has been very active in providing training courses of various levels of complexity for professionals in industry in Canada, USA and overseas.

His area of professional expertise has been the analysis and problem solving in operation of pressure systems, specifically of stationary components such as pressure vessels, storage tanks and piping systems, together with rotating machinery, such as pumps, compressors and turbines, in the process and petrochemical industry.

Technical consulting projects also included design, operation and maintenance of various thermal engineering components, such as heat exchangers and industrial heaters.

The focus in most of the projects has been on the equipment optimization, combined with the risk assessment and failure prevention technologies based on fitness for service studies and remaining life analysis.



INSCRIVEZ-VOUS
VOUS N’ÊTES PAS INTERESSÉ PAR CE COURS ?

Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).

Svp cochez cette case :
Note d’évaluation pour cette formation
4.5 sur 5

Évaluation globale de ce cours par ses participants précédents !

UNITÉS & FRAIS
  • 2,1 Unités de formation continue (UFC)
  • 21 Heures de développement professionnel (HDP)

1995 $ (+ TPS/TVQ)

Inscrivez-vous




Accumulez vos
UFC / HDP

Tous les cours du CIPE vous permettent d’obtenir vos UFC / HDP ; utiles pour ceux qui doivent accumuler et soumettre leurs HDP comme l’exige l’Ordre des ingénieurs du Québec.

Ces exigences de formation prennent fin le 31 mars 2021 !

VOIR LES COURS
ABONNEZ-VOUS POUR RESTER BIEN INFORMÉ

Ne pas manquer cette
occasion !

Recevez les dernières offres, des rapports liés à l'industrie, l'offre des cours à venir, et plus - tout simplement en vous inscrivant ci-dessous.

Abonnez-vous
Formation en entreprise

Les AVANTAGES de la formation en entreprise :

  • Efficacité et coût
  • Des cours de grandes qualité
  • Flexibilité
  • Pratique
  • Confidentialité
  • Offre des UFC / HDP (Unités de formation continue / Heures de développement professionnel). Obtenez un certificat avec des unités de formation continue (UFC). Une UFC vaut 10 HDP (Heures de développement professionnel).
En savoir plus
Top