Evaluation and Rehabilitation of Pavements
les 7 et 8 décembre 2020
Code : 1201-ONL20
After participating in the course, you will be able to:
- Design new pavements using the AASHTO 1993 Guide for the Design of Pavements
- Understand the basics of the AASHTOWare Pavement ME mechanistic-empirical design
- Understand and know when to use non-destructive testing for pavement evaluation
- Apply management techniques to improve the life-cycle and reduce the cost of pavements
- Design and maintain permeable pavements
- Use life-cycle cost techniques to maximize value over a pavement life-cycle
- Learn from the synthesis of best practices for pothole repair
- Use various maintenance and rehabilitation methods to extend the useful life of pavements
- Manage pavements and sidewalks efficiently with insight into pavement defects, their causes and repair
Cost effective pavement management is a result of careful design, quality construction and timely maintenance. Agencies are faced with the challenge of maintaining the significant public investment in transportation infrastructure. Although new materials and methods are being added to the roadway manager’s repertoire, they must accommodate increasing loads while continually fighting a challenging battle against deterioration.
This course examines practical techniques for the evaluation of asset condition and provides preventive maintenance and rehabilitation methods and materials to cost-effectively extend the service life of transportation assets. Learning will be further enhanced through presentations of case study examples.
- Factors that affect pavement performance
- New pavement design
- Pavement rehabilitation
- Pavement management
- Life-cycle costing
- Permeable pavement design & maintenance
- Preventive maintenance and pothole treatments
- Rehabilitation & maintenance methods
- Pavement technology developments
- Examples of poor and best practices for roads and sidewalks
Who Should Attend:
Project Engineers & Managers • Municipal Engineers • Operations Maintenance Engineers Construction and Design Engineers • Contractors • Consultants
10:00 am to 6:00 pm Eastern (Will include the usual breaks)
Horaire : 10:00 AM - 6:00 PM EDT
voir le programme complet
Welcome, Introduction, Workshop Preview, Learning Outcomes and the Assessment Method
Course Overview and Preview of the Day
Factors that Affect Pavement Performance
- History of pavement design in Canada
- Basics of pavement performance
- Factors that impact pavement performance: traffic, soils and materials, environment
- AASHTO 1993: flexible pavement design, rigid pavement design, interlocking concrete block pavement design
- Introduction to AASHTOW are Pavement ME Design mechanistic-empirical design
- Surface condition evaluation
- Structural capacity
- Developing alternatives for pavement rehabilitation
- Pavement performance evaluation
- Systematic maintenance programs
- Performance modelling
- Prioritization and optimization
- What is the best pavement type for your application?
- Asphalt concrete
- Exposed concrete
- Interlocking concrete block
- Surface treatment/seal cost
- Life-cycle costing examples
Permeable Pavement Design and Maintenance
Review of Day I and Preview of the Second Day
Pavement Rehabilitation and Maintenance Management
- Timely preventive maintenance
- Priority planning and programming
- Roadway drainage
- Utility repairs
- Pothole repair best practices
- Crack sealing
Rehabilitation and Maintenance Methodologies
- Thin surface treatments
- Surface texturization
- In-place recycling techniques
Recent Developments in Pavement Technology and Specifications
- Construction inspection and administration
- Best practices for asphalt paving
Sidewalk and Recreational Trail Design Practices and Management
The lecturer will provide examples of various pavement distresses and conditions for roads and sidewalks and you will discuss what the best method of repairing or upgrading the pavements.
Questions and Answers and Feedback to Participants on Achievement of Learning Outcomes
David Hein, P.Eng. is a consulting Civil Engineer with over 35 years of experience in the design, evaluation and management of transportation infrastructure. He recently retired from Applied Research Associates, Inc. of Toronto, Ontario. He is the past president of the American Society of Civil Engineers Transportation and Development Institute (ASCE T&DI), chair of the Workforce Development Council and chair of 5 engineering standards committees.
He is a long term member of the Transportation Association of Canada (TAC), Past-Chair of the pavements committee and member of the Workforce Development Council and past members of the Transportation Research Board pavement management, pavement maintenance and pavement preservation committees. He has represented Canada on the World Road Association (WRA) pavements and asset management committees since 2002 and is currently the Vice-Chair of the Canadian National Committee to the WRA. He also recently stepped down after 10 years as Executive Director of the Falling Weight Deflectometer User Group.
He has been involved in numerous national and international research, evaluation and asset management projects for Federal, State, Provincial and Municipal agencies and many of the public/private/ partnership highway construction projects across Canada and the United States.
VOUS N’ÊTES PAS INTERESSÉ PAR CE COURS ?
Nous visons toujours à améliorer la qualité de nos cours. Veuillez sélectionner les raisons pour lesquelles vous pensez que ce cours est inadéquat (Cochez toutes les cases qui s’appliquent).
Note d’évaluation pour cette formation
Évaluation globale de ce cours par ses participants précédents !
UNITÉS & FRAIS
- 1,4 Unités de formation continue (UFC)
- 14 Heures de développement professionnel (HDP)
1295 $ (+ TPS/TVQ)Inscrivez-vous
Accumulez vos HEURES DE FORMATION CONTINUE
Tous les cours du CIPE vous permettent d’obtenir vos Heures de formation continue ; utiles pour ceux qui doivent accumuler et soumettre leurs Heures comme l’exige l’Ordre des ingénieurs du Québec.
Ces exigences de formation prennent fin le 31 mars 2021 !VOIR LES COURS
Formation en entreprise
Les AVANTAGES de la formation de groupe en ligne :
- Efficacité et coût
- Des cours de grandes qualité
- Obtenez un certificat avec des Heures de formation continue
Brochure de cours
Le CIPE a un catalogue informatif en format PDF qui contient tous les cours à venir.Téléchargez dès maintenant